Taper Bored Pulley SPZ 56-1 (1008)
• All Challenge pulleys are produced from cast iron or steel and have a phosphated finish for protection
• V, Mi-Lock and Poly-V pulleys are balanced to Q6.3 or better allowing them to run at peripheral (rim) speeds up to 40 m/s
V Belt Pulleys
• Can accommodate both wedge and classical belts.
• Dual duty design complying with ISO 4183.
• Manufactured from GG25 high grade cast iron.
• Available in taper bore. Pilot and QD bush bores can be produced on enquiry.
• A wide range of non-standard styles and sizes up to a diameter of 2400 mm can be produced.
Our range of V-Pulleys are a tried and tested solution for a wide range of drives. Taper bore versions are offered from stock with a varying number of groves. By offering taper bored sprockets to suit standard taper lock bushes, several shaft diameters can be accommodated by a single pulley without the need for further machining. For low torque drives, it is also possible to use the taper lock bushes to clamp the V-Pulley on to the shaft without the need to use a keyway and key.
For special requirements (such as combining two belt profiles onto a single pulley) or large dimeter V-Pulleys up to 2400mm, please get in contact with us to discuss your specifications. If a standard taper lock bush fixing solution or cast iron material is not suitable for your application, then V-Pulleys can be manufactured to order with a range of bore options and material specifications.
Standard and custom - V and Timing Belt Pulleys
To complement our wide range of belts, we also manufacture and supply a range of standard and bespoke pulleys for our V belts and Timing belts. Manufactured from cast iron or steel, our pulley grooves are machine cut for accuracy and also statically or dynamically balanced (depending upon their size) to grade Q6.3 or better giving peripheral (rim) speeds of up to 40m/s.
The complete range of pulleys available from Challenge are manufactured from high grade close grain GG25 grey cast iron or steel before being phosphated for protection. Metric timing pulleys are also available from lightweight aluminium with a natural finish.
Shaft fixing option vary due to the large range of sizes and materials available, but as standard the range of pulleys come with either a taper bore, pilot bore or both types of bores.
V Belt Pulleys
With high quality machined groves and availability from nearly 20 official locations around world, these cost effective and readily available range of pulleys have proven themselves countless times over the last 40 years. Coupled with our wide range of Shaft Mounted Speed Reducers, they offer a reliable method of reducing motor speeds, which has become an industry standard.
Available to suit both wedge and classical belts to ISO 4184. Groove dimensions conform to ISO 4183 for both eccentricity of outside diameter to bore and groove side wobble tolerance.
All pulleys are available with a taper bore to suit the Challenge range of stock taper lock bushes although pilot and QD bush bore pulleys can also be manufactured.
A wide range of non-standard styles and sizes up to a diameter of 2400mm can be produced.
Poly-V pulleys are also available for sections J, K and L
Timing Belt Pulleys
Working in precision applications globally, our range of timing belts and corresponding pulleys have been developed around the industries that we supply daily. With our ability to manufacture special pulleys or offer light weight solutions from aluminium we can offer a solution for a vast array of precision drive systems.
Timing belt pulleys are available for the standard Classical, HTD and Metric belts. Classical L and H pulleys are available with a taper bore as are 5M, 8M and 14M HTD pulleys. All other sizes are available in pilot bore including the complete range of Metric timing pulleys. If you require a taper bore for a Metric or large Classical pulley, then these can often be manufactured to order.
|Pulley - Belt Range||SPZ|
|Pulley - Product Designation||10-3M-06|
|Pulley - No. Of Grooves or Teeth||1|
|Pulley - Tooth Width||50|
|Pulley - Pitch Diameter||56|
|Pulley - Diameter To Top Of Teeth||8.79|
|Pulley - Outside Diameter||60|
|Pulley - Hub Diameter||8|
|Pulley - Recess Diameter||38|
|Pulley - Rim Width||15|
|Pulley - Distance Thro.||35|
|Pulley - Pilot Bore Diameter||5|
|Pulley - Weight / kg||0.5|
|Pulley - Material||AL|
|Pulley - Bush Size||1008|
|Pulley Config And Style||S1|
|Pulley - Hub Length||22|
|Pulley - Belt Section||SPA|
|Pulley - Max Bore||25|
|Pulley - Mid Pitch Diameter||71|
|Pulley - Max/Min Diameter||109 - 133|